How do I adjust the blower fan on my gas fireplace?
In this video, our QC Supervisor Dan McNulty walks us through the controls for the fireplace blower. Dan gives instructions for how to remove the screen, access the controller, and adjust the blower fan setting.
Simplified Video Transcript:
The fireplace has a blower that turns on, takes about 15 minutes or so to get to temperature.
In the manual, it's going to describe what I'm gonna walk you through. Lift the screen, pull it out.
I usually have my people put it around medium because of the noise factor, you can set it to anything you want to. Right now it's about medium... this is what you would hear. Turn it up it's a little louder, if you want just the ambiance from the fire - no fan you could even turn it right off.
To put the screen back on, there are four hooks on each corner, you see four screws lineup with the holes. Line it push it on, and let it drop down.
*DISCLAIMER* Please note that all houses are unique and some advice in the video may not apply to your home. For more information, please refer to the Product Materials & Warranty Registration Information packet located in the drawer shown in "The Kitchen" video.